Loading... Please wait...
Categories
News
What are the advantages and disadvantages of different handle materials?
when the blade is by far the most important component, the handle deserves attention as well.
If the handle is defective, cheap or poorly installed, it affects the overall value and utility of the knife. Then, beyond quality,
it's a matter of choosing from the myriad handle materials available - and that, we know, can be downright confusing .
We divide handle materials into two main categories: natural and synthetic. Natural materials - like wood, bone, horn and antler
- are beautiful, traditional and time-tested as knife handles. Synthetic materials include Micarta, G-10, celluloid, Various
rubberized materials and acrylic.
Natural handle materials
In terms of aesthetics, most people will tell you that natural handle materials are their favorites. They also hold up quite well,
generally speaking, and are an excellent choice.
The only drawback of natural handles is a tendency to expand and contract (gradually) with changes in temperature and humidity.
On a full-tang knife that means you may occasionally feel the tang or the edge of a handle slab. It's nothing to worry about - just
give it a few days and it'll expand or contract back into place.
WOODWood handles (including burls and spalted woods) are beautiful and durable. Their natural expansion and contraction varies
depending on the type of wood.
Other woods must be "stabilized" for sustained use on knives. (The stabilizing process involves filling the voids in the wood with a
resin. The resin permeates the Wood and makes it stronger.) Even stabilized wood can still expand and contract, but we believe it
makes a fine knife handle.
Bone is most often used for the "scales" of pocketknives. It's popular because of its beauty as well as its ability to be dyed and
"jigged" (carved). Most bone used in knife handles comes from cattle (shin bones, specifically) , Although camel bone is becoming
more common these days. Bone-handled knives are a great choice.
HORN
Horn - such as buffalo or impala horn - is actually the hair of an animal. It's visually appealing, but it's prone to natural expansion
and contraction and is less durable than most other natural materials. None of that makes it unsuitable for knife handles - those
are just the characteristics of horn knife handles.
Antler, contrary to what most people believe, is completely different from horn - horn is hair, while antler is bone, making it much
stronger and more stable than even the most durable wood.
The antler used for knife handles can come from elk or from deer, but the really good stuff comes from Indian Sambar Stag.
Sambar has been banned for export from India for many years - it's quite collectible now and its value is climbing every day.
It's easily the most popular handle material in premium-quality traditional pocketknives and the favorite of many knife lovers
(himself included).
Synthetic handle materials
MICARTA
Micarta and G-10 are similar. Both are resin-saturated substrates - Micarta, originally developed as an insulator for electrical
parts, uses cloth or paper as its substrate, while G-10 uses fiberglass.
Both Micarta and G-10 are available in a variety of colors, are completely stable and do not expand or contract. They look great,
feel terrific in the hand and are nearly indestructible - we highly recommend either Micarta or G-10 for Hard-use knives.
With its wide array of colors and patterns, its beauty is undeniable. Unfortunately, over time it degrades and tends to separate
from the knife. In the mid-twentieth century, primarily on pocketknives. Celluloid was a popular handle material during the mid-
Even though we sell some pocketknives that still use this material, we can not give celluloid a high recommendation. According
to most knife-appraisal books, a celluloid-handled knife is worth significantly less than a comparable knife handled in any other material.
ACRYLIC
Acrylic, on the other hand, offers all of the beauty of celluloid without the drawbacks. Its appearance is an acquired taste, and it
is not for everyone, but acrylic is a durable handle material for a quality pocketknife.
Injection-Molded Rubberized handles vary widely in their usability. If the rubber is too soft, it's almost certain to break down
and be uncomfortable in real-world use. Honestly, most knife companies using rubberized handles do so for one reason -
to keep Costs down.
There's one exception - Fällkniven - and we're proud to carry their knives. Fällkniven uses rubberized handles extensively
and does a great job with them. Their handles are relatively hard, hold up well and feel good in the hand. Done well,
If the handle is defective, cheap or poorly installed, it affects the overall value and utility of the knife. Then, beyond quality,
it's a matter of choosing from the myriad handle materials available - and that, we know, can be downright confusing .
We divide handle materials into two main categories: natural and synthetic. Natural materials - like wood, bone, horn and antler
- are beautiful, traditional and time-tested as knife handles. Synthetic materials include Micarta, G-10, celluloid, Various
rubberized materials and acrylic.
Natural handle materials
In terms of aesthetics, most people will tell you that natural handle materials are their favorites. They also hold up quite well,
generally speaking, and are an excellent choice.
The only drawback of natural handles is a tendency to expand and contract (gradually) with changes in temperature and humidity.
On a full-tang knife that means you may occasionally feel the tang or the edge of a handle slab. It's nothing to worry about - just
give it a few days and it'll expand or contract back into place.
WOODWood handles (including burls and spalted woods) are beautiful and durable. Their natural expansion and contraction varies
depending on the type of wood.
Other woods must be "stabilized" for sustained use on knives. (The stabilizing process involves filling the voids in the wood with a
resin. The resin permeates the Wood and makes it stronger.) Even stabilized wood can still expand and contract, but we believe it
makes a fine knife handle.
Bone is most often used for the "scales" of pocketknives. It's popular because of its beauty as well as its ability to be dyed and
"jigged" (carved). Most bone used in knife handles comes from cattle (shin bones, specifically) , Although camel bone is becoming
more common these days. Bone-handled knives are a great choice.
HORN
Horn - such as buffalo or impala horn - is actually the hair of an animal. It's visually appealing, but it's prone to natural expansion
and contraction and is less durable than most other natural materials. None of that makes it unsuitable for knife handles - those
are just the characteristics of horn knife handles.
Antler, contrary to what most people believe, is completely different from horn - horn is hair, while antler is bone, making it much
stronger and more stable than even the most durable wood.
The antler used for knife handles can come from elk or from deer, but the really good stuff comes from Indian Sambar Stag.
Sambar has been banned for export from India for many years - it's quite collectible now and its value is climbing every day.
It's easily the most popular handle material in premium-quality traditional pocketknives and the favorite of many knife lovers
(himself included).
Synthetic handle materials
MICARTA
Micarta and G-10 are similar. Both are resin-saturated substrates - Micarta, originally developed as an insulator for electrical
parts, uses cloth or paper as its substrate, while G-10 uses fiberglass.
Both Micarta and G-10 are available in a variety of colors, are completely stable and do not expand or contract. They look great,
feel terrific in the hand and are nearly indestructible - we highly recommend either Micarta or G-10 for Hard-use knives.
With its wide array of colors and patterns, its beauty is undeniable. Unfortunately, over time it degrades and tends to separate
from the knife. In the mid-twentieth century, primarily on pocketknives. Celluloid was a popular handle material during the mid-
Even though we sell some pocketknives that still use this material, we can not give celluloid a high recommendation. According
to most knife-appraisal books, a celluloid-handled knife is worth significantly less than a comparable knife handled in any other material.
ACRYLIC
Acrylic, on the other hand, offers all of the beauty of celluloid without the drawbacks. Its appearance is an acquired taste, and it
is not for everyone, but acrylic is a durable handle material for a quality pocketknife.
Injection-Molded Rubberized handles vary widely in their usability. If the rubber is too soft, it's almost certain to break down
and be uncomfortable in real-world use. Honestly, most knife companies using rubberized handles do so for one reason -
to keep Costs down.
There's one exception - Fällkniven - and we're proud to carry their knives. Fällkniven uses rubberized handles extensively
and does a great job with them. Their handles are relatively hard, hold up well and feel good in the hand. Done well,
It makes a fine knife handle.
Remember, if a blade is top-notch and the 'maker is using quality components, choose a handle material that you like and
enjoy your knife....
【 Go Back 】 | 【 Print 】 | 【 Close this window 】
